Procamptek Ultimate Fire Tinder - Cold Water Saturation Test
Procamptek Ultimate Fire Tinder
When Procamptek set out to create the new Ultimate Fire Tinder, the mission was to build a fire starting tinder worthy of that name. It not only had to be the easiest tinder on the planet to ignite...it also had to be able to do it in any weather you are likely to face. After all, what good is a fire tinder if it doesn't work when you need it most?! Likely, when you need it most you are both cold and wet...which leads to your fingers being numb. You may even be to the point of hypothermia. That's not the best time to find out your tinder is going to let you down! We're talking life and death here.
Cold Water Saturation Test in Cold Weather Conditions
Procamptek accomplished that mission with the newest Ultimate Fire Tinder. It is ridiculously waterproof. So much so that you can absolutely soak it, and it still lights. It also works with sparks that are not as hot...such as a flint spark from an empty lighter! Talk about reliable. Go ahead and take your Bic lighter in the field. Even it cracked and all the fluid leaked out, you could still start a fire with it! All you need is the spark from the lighter.
That "light it with a spark" makes it a perfect match for a product like Exotac's nanoSPARK, which uses a flint just like the ones found in a Zippo lighter to generate sparks. Of course, you can also use Ultimate Fire Tinder with a ferro rod or firesteel...they generally have sparks that are much hotter than a lighter's flint. That makes them a fantastic choice to use along side the Ultimate Fire Tinder, since they both work fine after being exposed to water. It goes without saying that a lighter and matches, which already provide an open flame, work fantastic with Ultimate Fire Tinder.
Get your Ultimate Fire Tinder here
Leave a comment
Comments will be approved before showing up.
Also in Videos
Installing the Shotgun Butt Stock Cover by RLO Custom Leather
Robert shows how to install an RLO Custom Leather Shotgun Butt Stock Cover. Made in USA by American craftsmen at the RLO Custom Leather shop in Bronson, FL!
In the video, the shotgun used is a Winchester SXP in 12 gauge. However, since RLO makes a large variety of patterns for shotguns and rifles, the installation process is the same whether you have a Winchester, Remington, Stoeger, CZ, Benelli, Mossberg, or other shotgun model. This is assuming your shotgun has a straight comb stock and is in 12, 16, or 20 gauge. Since many .410 shotguns use a rifle stock, most of those are covered with the Rifle Butt Stock Covers offered by RLO Custom Leather at Fiddleback Outpost.
Fast Fire Stick - Overview - NEW PRODUCT!
How To Use Fire Strip Roll With a Firesteel
Yes, you can use a ferro rod (aka firesteel) to light Fire Strip Roll from Production Hangar 51! Fire Strip Roll™ was actually designed for the Exotac NanoSpark (or even a Bic with no fluid left) but it can be used with a ferro rod or firesteel as well if you must...with a little smart preparation.
Here's how...
